• Rural Digital Europe
• KR close
• AE close
• Sensors close
• Infoscience - EPFL scientific publi... close

to the best of our knowledge, no study has investigated the elderly’s perception of ISHS. Consequently, this study aims to investigate the elderly’s perception of the ISHS by comprehensively evaluating its possible benefits and negative responses. A set of sensors required for an ISHS was determined, and interviews were designed based on four factors: perceived comfort, perceived usability, perceived privacy, and perceived benefit. Subsequently, technological trials of the sensor-set followed by two focus group interviews were conducted on nine independently living elderly participants at a senior welfare center in South Korea. Consistent with previous studies, the results of this investigation indicate that elderly participants elicited negative responses regarding usability complexity, and discomfort to daily activities. Despite such negative responses, after acquiring enough awareness about the ISHS’s benefits, the elderly acknowledged its necessity and showed a high level of willingness. Furthermore, these results indicate that for a better adoption of an ISHS, sufficient awareness regarding its benefits and development of elderly-friendly smart home sensors that minimize negative responses are required. An integrated smart home system (ISHS) is an effective way to improve the quality of life of the elderly. The elderly’s willingness is essential to adopt an ISHS

Wearable Internet of Things (IoT) devices can be used efficiently for gesture recognition applications. The nature of these applications requires high recognition accuracy with low energy consumption, which is not easy to solve at the same time. In this paper, we design a finger gesture recognition system using a wearable IoT device. The proposed recognition system uses a light-weight multi-layer perceptron (MLP) classifier which can be implemented even on a low-end micro controller unit (MCU), with a 2-axes flex sensor. To achieve high recognition accuracy with low energy consumption, we first design a framework for the finger gesture recognition system including its components, followed by system-level performance and energy models. Then, we analyze system-level accuracy and energy optimization issues, and explore the numerous design choices to finally achieve energy–accuracy aware finger gesture recognition, targeting four commonly used low-end MCUs. Our extensive simulation and measurements using prototypes demonstrate that the proposed design achieves up to 95.5% recognition accuracy with energy consumption under 2.74 mJ per gesture on a low-end embedded wearable IoT device. We also provide the Pareto-optimal designs among a total of 159 design choices to achieve energy–accuracy aware design points under given energy or accuracy constraints.

An aging population and human longevity is a global trend. Many developed countries are struggling with the yearly increasing healthcare cost that dominantly affects their economy. At the same time, people living with old adults suffering from a progressive brain disorder such as Alzheimer's disease are enduring even more stress and depression than those patients while caring for them. Accordingly, seniors' ability to live independently and comfortably in their current home for as long as possible has been crucial to reduce the societal cost for caregiving and thus give family members peace of mind, called 'aging in place' (AIP). In this paper we present a way of building AIP services using standard-based IoT platforms and heterogeneous IoT products. An AIP service platform is designed and created by combining previous standard-based IoT platforms in a collaborative way. A service composition tool is also created that allows people to create AIP services in an efficient way. To show practical usability of our proposed system, we choose a service scenario for medication compliance and implement a prototype service which could give old adults medication reminder appropriately at the right time (i.e., when it is time to need to take pills) through light and speaker at home but also wrist band and smartphone even outside the home.

A single M13 bacteriophage color sensor was previously utilized for discriminating the geographical origins of agricultural products (garlic, onion, and perilla). The resulting discrimination accuracy was acceptable, ranging from 88.6% to 94.0%. To improve the accuracy further, the use of three separate M13 bacteriophage color sensors containing different amino acid residues providing unique individual color changes (Wild sensor: glutamic acid (E)-glycine (G)-aspartic acid (D), WHW sensor: tryptophan (W)-histidine (H)-tryptophan (W), 4E sensor: four repeating glutamic acids (E)) was proposed. This study was driven by the possibility of enhancing sample discrimination by combining mutually characteristic and complimentary RGB signals obtained from each color sensor, which resulted from dissimilar interactions of sample odors with the employed color sensors. When each color sensor was used individually, the discrimination accuracy based on support vector machine (SVM) ranged from 91.8–94.0%, 88.6–90.3%, and 89.8–92.1% for garlic, onion, and perilla samples, respectively. Accuracy improved to 98.0%, 97.5%, and 97.1%, respectively, by integrating all of the RGB signals acquired from the three color sensors. Therefore, the proposed strategy was effective for improving sample discriminability. To further examine the dissimilar responses of each color sensor to odor molecules, typical odor components in the samples (allyl disulfide, allyl methyl disulfide, and perillaldehyde) were measured using each color sensor, and differences in RGB signals were analyzed.

According to the survey on various health centres, smart log-based multi access physical monitoring system determines the health conditions of humans and their associated problems present in their lifestyle. At present, deficiency in significant nutrients leads to deterioration of organs, which creates various health problems, particularly for infants, children, and adults. Due to the importance of a multi access physical monitoring system, children and adolescents’ physical activities should be continuously monitored for eliminating difficulties in their life using a smart environment system. Nowadays, in real-time necessity on multi access physical monitoring systems, information requirements and the effective diagnosis of health condition is the challenging task in practice. In this research, wearable smart-log patch with Internet of Things (IoT) sensors has been designed and developed with multimedia technology. Further, the data computation in that smart-log patch has been analysed using edge computing on Bayesian deep learning network (EC-BDLN), which helps to infer and identify various physical data collected from the humans in an accurate manner to monitor their physical activities. Then, the efficiency of this wearable IoT system with multimedia technology is evaluated using experimental results and discussed in terms of accuracy, efficiency, mean residual error, delay, and less energy consumption. This state-of-the-art smart-log patch is considered as one of evolutionary research in health checking of multi access physical monitoring systems with multimedia technology.

The Internet of Things (IoT) concept has attracted a lot of attention from the research and innovation community for a number of years already. One of the key drivers for this hype towards the IoT is its applicability to a plethora of different application domains. However, infrastructures enabling experimental assessment of IoT solutions are scarce. Being able to test and assess the behavior and the performance of any piece of technology (i.e., protocol, algorithm, application, service, etc.) under real-world circumstances is of utmost importance to increase the acceptance and reduce the time to market of these innovative developments. This paper describes the federation of eleven IoT deployments from heterogeneous application domains (e.g., smart cities, maritime, smart building, crowd-sensing, smart grid, etc.) with over 10,000 IoT devices overall which produce hundreds of thousands of observations per day. The paper summarizes the resources that are made available through a cloud-based platform. The main contributions from this paper are twofold. In the one hand, the insightful summary of the federated data resources are relevant to the experimenters that might be seeking for an experimental infrastructure to assess their innovations. On the other hand, the identification of the challenges met during the testbed integration process, as well as the mitigation strategies that have been implemented to face them, are of interest for testbed providers that can be considering to join the federation.

Advancements in IoT technology have been instrumental in the design and implementation of various ubiquitous services. One such design activity was carried out by the authors of this paper, who proposed a novel cloud-centric IoT-based disaster management framework and developed a multimedia-based prototype that employed real-time geographical maps. The multimedia-based system can provide vital information on maps that can improve the planning and execution of evacuation tasks. This study was intended to explore the acceptance of the proposed technology by the specific set of users that could potentially lead to its adoption by rescue agencies for carrying out indoor rescue and evacuation operations. The novelty of this study lies in the concept that the acceptability of the proposed system was ascertained before the complete implementation of the system, which prevented potential losses of time and other resources. Based on the extended Technology Acceptance Model (TAM), we proposed a model included factors such as perceived usefulness, perceived ease of use, attitude, and behavioural intention. Other factors include trust in the proposed system, job relevance, and information requirement characteristics. Online survey data collected from the respondents were analyzed using structural equation modelling (SEM) revealed that although perceived ease of use and job relevance had significant impacts on perceived usefulness, trust had a somewhat milder impact on the same. The model also demonstrated a statistically moderate impact of trust and perceived ease of use on behavioural intention. All other relationships were statistically strong. Overall, all proposed relationships were supported, with the research model providing a better understanding of the perceptions of users towards the adoption of the proposed technology. This would be particularly useful while making decisions regarding the inclusion of various features during the industrial production of the proposed system.